Product Code: PCE-TU 3
Condition Monitoring Laser Shaft Alignment Tool PCE-TU 3, Condition Monitoring Laser Shaft Alignment Tool Condition Monitoring Laser Shaft Alignment Tool Coupled Machine Pump Bearing Seal Soft Foot: PCE-TU 3 is a condition monitoring laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime. - Max. 10 m / 32.8 ft distance between sensors - Accuracy: ± 1 % + 0.001 - Resolution: 0.001 mm / 0.1° PCE-TU 3 Condition Monitoring Laser Shaft Alignment Tool Prevent premature failure of couplings, bearings and mechanical seals PCE-TU 3 is a condition monitoring laser shaft alignment tool designed to aid in aligning rotating equipment (e.g., electric motor and direct-coupled machine) shafts to prevent premature failure of couplings, bearings and mechanical seals. PCE-TU 3 also helps you detect and correct soft foot to avoid costly downtime. The PCE-TU 3 alignment tool features two red laser sensors that can be fixed to a shaft. This class 2 laser system has a typical wavelength of 670 nm, < 1 mW capacity, and maximum radiation energy of 0.1 mJ per impulse. The class 2 laser meets applicable ANSI, BS 4803, IEC 825 and US FDA requirements. - Features two red class 2 laser sensors - Maximum 10 m / 32.8 ft distance between sensors - Horizontal alignment in every position from 60° ... 360° - Vertical alignment - Auto sweep mode - Adjustable tolerances - Tilt (incline) measurement - Thermal growth - Spacer simulation - PDF reports - USB data transfer (optional Bluetooth adapter) - 2 GB internal memory Max. distance 10 m / 32.8 ft between sensors Accuracy ±1 % + 0.01 Resolution 0.001 mm Display resolution 0.01 or 0.001 mm Sensor type Position-sensitive photo diodes, approx. 10 x 10 mm / 0.4 x 0.4" Laser type Visible, red, 635 ... 670 nm, < 1 mW Tilt (incline) resolution 0.1 ° Interface USB standard, Bluetooth optional Memory 2 GB data, internal Operating temp. range -10 ° ... +55 °C / +14 ... +131 °F Power supply NiMH battery (rechargeable) Enclosure Silicone protection Ingress protection rating IP65 Weight 7.5 kg / 16.5 lbs See user manual for complete specifications. 1 x PCE-TU 3 condition monitoring laser shaft alignment tool with battery 2 x laser sensors 2 x sensor mounting kits 1 x measuring tape 1 x battery charger 1 x connection cable 1 x PC-compatible software 1 x USB cable 1 x user manual 1 x carrying case
Visit the PCE Instruments UK Ltd website for more information on Condition Monitoring Laser Shaft Alignment Tool PCE-TU 3